한국어
English
Pусский
Français
Español
Portugues
Deutsch
lingua italiana
العربية
Melayu
Filipino
Монгол хэл
dansk
Bahasa indonesia
日本語
Türk dili
Tiếng Việt
svenska
Nederlands
Norsk språk블로그
문의 보내기
어떻게? (14)
2024-05-01
What is Condenser /Iris Diagram?
A condenser is a lens or system of lenses used to converge or diverge light. In microscopy, a condenser is a necessary component that provides illumination to the sample you’re viewing.
2024-04-15
What is scanning electron microscope?
A scanning electron microscope (SEM) is a type of electron microscope that uses a focused beam of electrons to produce highly magnified images of the surface of a sample. SEMs are widely used in materials science, geology, biology, and other fields to study the topography and composition of a wide range of materials.
2024-04-02
What is an objective?
The objective is the most important part of the microscope optical system. As part of the microscope optical system, the objective lens is mainly responsible for collecting the light emitted or reflected by the sample and focusing it to form a microscopic magnification image.
2024-04-01
What is an Ultrathin Microtom?
Ultramicrotomy is mainly used as a sample preparation method for transmission electron microscopy (TEM). It permits the internal fine structures of samples to be visualized and analyzed at nanometer scale resolution. It produces ultrathin sections of samples in a fast and clean manner.
2024-03-15
What is Comparison Microscope?
A comparison microscope, also known as forensic microscope, is a specialized type of microscope that allows two specimens to be viewed side-by-side in a single field of view. It is commonly used in forensic science and other fields where comparative analysis of specimens is required.
2024-03-01
What is Motorized Inverted Fluorescent Microscope?
Simple operation, powerful function, flexible collocation, cost-effective.\nThe A16.1098 uses excellent infinity optics. The field of view is uniform, bright, and the color reproduction is high. Meet a variety of laboratory life science research observation needs.
2024-02-15
What is an industry Motorized Microscope?
Industrial electric microscope is a three-dimensional microscope with ultra-depth of field. It can observe metals, wafers, fibers, banknotes and coins, etc. It is mainly used to measure metals. It is not recommended to observe slices because there is no bottom light source.
2024-02-01
What is a Motorized Microscope?
Motorized Microscope is Microscope.\nBut, part of the structure of the microscope is controlled by a motor.
2024-01-15
What is Confocal Laser Scanning Microscope (CLSM)?
CLSM microscope creates an image by only detecting the light that originates from the same focal point as the laser beam, while excluding the light from other planes. The confocal design of the microscope provides several advantages over conventional microscopes, such as improved depth resolution, reduced background blur, and the ability to generate 3D reconstructions of the specimen.
2024-01-01
What is Atomic Force Microscope?
An AFM generates images by scanning a small cantilever over the surface of a sample. The sharp tip on the end of the cantilever contacts the surface, bending the cantilever and changing the amount of laser light reflected into the photodiode. The height of the cantilever is then adjusted to restore the response signal, resulting in the measured cantilever height tracing the surface.
2023-09-01
What is Eyepiece?
The eyepiece is the lens close to the eye in the microscope optical system, also called the ocular lens. The eyepiece can re-magnify the real image* (intermediate image) magnified by the objective lens so that it can be observed by the human eye. Generally the eyepiece consists of 2-3 groups of lenses, with one (group) lens at the upper end called the "eyepiece" and the lens at the lower end called the "field lens".
모두 표시
(7)
소식 (5)
온라인 서비스
온라인 서비스
우리는 지원하기 위해 온라인으로 왔습니다!
Huang Xin