English
Pусский
Français
Español
Portugues
Deutsch
lingua italiana
العربية
Melayu
Filipino
Монгол хэл
dansk
Bahasa indonesia
日本語
한국어
Türk dili
Tiếng Việt
svenska
Nederlands
Norsk språk
An NIR microscope is a type of microscope that uses near-infrared radiation (NIR) to image samples and obtain spectral information about their chemical composition. This technology combines the spatial resolution of microscopy with the spectral analysis of NIR spectroscopy to provide a powerful tool for analyzing materials at the microscopic level. |
 | NIR Camera For Wide Spectrum Range A13.0915 series uses a wide spectrum dedicated infrared NIR camera, covering bright field and infrared observation. Field illumination, wide imaging field of view and high resolution. Used with bandpass color filter for area array detection. lt can respond to different parts of the chip inside the silicon wafer to meet the needs of different customers. Wide-field illumination, area array detection to achieve wide spectrum, large field of view and high-resolution imaging. |
| NIR Camera | Pixel | Band | Frame rate | Pixel size |
| A59.0971-3.2M (Standard) | 3.2M | 400~1100nm | 120fps@2064x1544 | 3.45 μm |
| A59.0971-1.3M (Optional) | 1.3M | 400~1700nm | 72fps@1280X1024 | 5 μm |
NIR Reflect Epi-illuminator ●For optical elements in illuminators. The device increases in the 400-1700nmband Transparent, you can choose between bright field (BF) and infrared (NIR) field selection, wide spectral range, small scattering, suitable for silicon wafers (Germanium sheet) has strong penetrating performance. ●The aperture diaphragm and objective lens magnification vary from automatic matching, no need for manual adjustment, fast and efficient, suitable for different user same view observe the effect. |  |
NIR Infinity Plan Semi-APO Objectives With special designed A5M.0946 NIR objectives, you can observe the interior of packaged chips and wafers in real time, show clearer ultra-wide spectrum imaging easily. ●A13.0915 series industrial infrared microscope imaging system is equipped with 5X-50Xprofessionalinfrared objects Mirror that provides aberration correction from visible to near-infrared wave lengths, suitable for conventional brightfield and dedicated infrared observation. ●For high-magnification objectives with larger numerical apertures, a correction ring is added to correct the overlay. Aberrations caused by different cover sheet thicknesses enable high-definition and accurate detection in the near-infrared band. |
NIR Filter Sliders A13.0915 designed multi-hole filter sliders , 1100nm, 1200nm, 1300nm bandpass near-infrared color filters for option Users can quickly switch bands, realize responses of different structures in the same area through narrow-band width secondary filtering, and obtain sharp images. |
Ergonomics Design Provide The Highest Working Efficiency |
 | High Speed Motorized Nosepiece ●Equipped with forward and backward moving modes to quickly and accurately locate the required objective with high repeatable positioning accuracy. ●Mechanical switching mode effectively improves extend the working life of the nosepiece. |
Independently Developed Software with More Operating Functions A13.0915series adopts Mv Image software. On functional modules such as management, measurement, image collection, and layer management, additional With the unique infrared image enhancement function, it can also be customized according to customer needs. |
Image Enhancement Improve the image clarity of infrared penetration, making local details more obvious. |
 | Al Software Empowerment Self-developed Al can automatically detect defects in samples main learning function, automatic defect identification, capture, counting statistics and other functions. At the same time, according to different customers customized on demand. |
| A13.0915 NIR Near-infrared Industrial Metallurgical Microscope | A13.0915 | Cata. No. | ||||
| 6R | 8R | 12R | 12RT | |||
| Optical System | Infinity color corrected optical system | ● | ● | ● | ● | |
| Observation | Bright field (BF)/Near-infrared (NIR) | ● | ● | ● | ● | |
| Viewing Head | NIR 30° trinocular head (Erect image), interpupillary 50-76mm, splitting ratio 100:0 or 0:100 | ● | ● | ● | ● | A53.0915 |
| Eyepiece | WF PL10X/22mm, diopter adjustable, high eyepoint | ○ | ○ | ○ | ○ | A51.0904-1022T |
| WF PL10X/22mm, diopter adjustable, high eyepoint, with micrometer | ○ | ○ | ○ | ○ | A51.0905-1022NRT | |
| WF PL10X/23mm, diopter adjustable, high eyepoint | ● | ● | ● | ● | A51.0904-1023T | |
| WF PL10X/23mm, diopter adjustable, high eyepoint, with micrometer | ○ | ○ | ○ | ○ | A51.0905-1023NRT | |
| Infinity Plan Semi-APO NIR Objective | NIR5X/0.15, WD=19.5mm, Wavelength 450-1700nm | ● | ● | ● | ● | A5M.0946-5 |
| NIR10X/0.3, WD=12.2mm, Wavelength 450-1700nm | ● | ● | ● | ● | A5M.0946-10 | |
| NIR20X/0.45, WD=7.31-7.57mm, Wavelength 450-1700nm, cover glass 0-1.2mm with correcting ring | ● | ● | ● | ● | A5M.0946-20 | |
| NIR50X/0.70, WD=2.68-2.93mm, Wavelength 450-1700nm, cover glass 0-1.2mm with correcting ring | ● | ● | ● | ● | A5M.0946-50 | |
| Nosepiece | Motorizedsextuple nosepiece with DlC slot | ● | ● | ● | ● | |
| Focusing | Low position coaxial focus mechanism, coarse range 35mm, fine precision 0.001mm, with upper limit and tension adjustment. | ● | ● | ● | ● | A54.0930-MX6 |
| Frame & Illuminator | NIR Reflect frame, 100-240V wide voltage power supply --NIR Reflect illuminator 12V100W halogen, with variable motorized aperture diaphragm, center adjustable; with BF/NIR switch; with filter slot, | ● | ● | ● | - | |
| NIR Reflect & Transmit frame, 100-240V wide voltage power supply --NIR Reflect illuminator 12V100W halogen, with variable motorized aperture diaphragm, center adjustable; with BF/NIR switch; with filter slot, --Transmit illumination 5W warm LED, | - | - | - | ● | ||
| Stage | 6”three-layer mechanical stage; size 445x240mm, moving range158x158mm; with clutch handle for rapid movement; with metal plate for Reflection | ● | - | - | A54.0971-6R | |
| Rotary stage with 6” wafer tray, suitable for 4”, 5”, 6” inch wafers | ○ | - | - | - | A54.0971-6WT | |
| 8”three-layer mechanical stage, size 525x330mm, moving range 210x210mm; with clutch handle for rapid movement; with metal plate for Reflection | ● | - | - | A54.0971-8R | ||
| Rotary stage with 8” wafer tray, suitable for 6”, 8” wafers | - | ○ | - | - | A54.0971-8WT | |
| 12”x14”three layers mechanical stage; size 710x420mm, moving range 305x356mm, with clutch handle for rapid movement; with metal stage plate for Reflection | - | - | ● | - | A54.0971-12R | |
| 12”x14”three layers mechanical stage; size 710x420mm, moving range 305x356mm, with clutch handle for rapid movement; with glass stage plate for Reflection & Transmission | - | - | - | ● | A54.0971-12RT | |
| Rotating stage with 12” wafer tray, suitable for 6”, 8”, 12” wafers | - | - | ○ | ○ | A54.0971-12WT | |
| Filter | NIR Band-pass filter 1100nm | ● | ● | ● | ● | A56.0971-1100 |
| NIR Band-pass filter 1200nm | ○ | ○ | ○ | ○ | A56.0971-1200 | |
| NIR Band-pass filter 1300nm | ○ | ○ | ○ | ○ | A56.0971-1300 | |
| Camera | 1.3M NlR 400-1700nm monochrome camera, inGsAs, 125fpa@1280x1024, camera link, pixel size 5um | ○ | ○ | ○ | ○ | A59.0971-1.3M |
| 3.2M NlR 400-1100nm monochrome camera, Sony IMX252, 120fps@2064 x1544, USB 3.0, pixel size 3.45um | ● | ● | ● | ● | A59.0971-3.2M | |
| Camera Adapter | 0.35X C -mount, Focus Adjustable | ○ | ○ | ○ | ○ | A55.0930-35 |
| 0.5 X C -mount , Focus Adjustable | ○ | ○ | ○ | ○ | A55.0930-05 | |
| 0.65X C -mount , Focus Adjustable | ○ | ○ | ○ | ○ | A55.0930-65 | |
| 1X C -mount, Focus Adjustable | ● | ● | ● | ● | A55.0930-10 | |
| Others | Stage micrometer 0.01mm graticule, metallographic correction film | ● | ● | ● | ● | |
| MV Image software with image processing, image acquisition, image management, measurement functions | ● | ● | ● | ● | ||
| PC i5 16G, 1T+256G, 2G Graphic, 23' LCD | ● | ● | ● | ● | ||
| Spanner M4, M6 | ● | ● | ● | ● | ||
Huang Xin