E17.8201 Low Temperatur Stirling Engine Model

Stirling engine is an external heat engine which is a hot piston heat engine with the cycle closed outside.

Principlle:It makes power through thermal expansion and cold compression of the gas .Expansion of the gas makes power to force the piston move, and then the gas cools in the air-conditioned room.Again and again for this cycle.

This model is the best demonstration equipment for Carnot Cycle. Also it is the best presentation equipment which can covert thermal energy to kinetic energy and then to electrical energy.

Flywheel and brackets are connected by high-precision bearings.

Safe Boot Steps:
1. Put the engine model on the horizontal position.
2. Gently turn the flywheel to check the flywheel rotates smoothly or not and if there is a strong sense of jerky, you should check the connecting rod. Then gently turn the flywheel until the flywheel rotates smoothly.
3. Join hot water in the container, and put the model of great circle on the container(or on the other heat which does not exceed 100℃).After a few seconds, we begin to struck the flywheel gently until it can automatically rotate.
Safety and Step:
In the end ,we should discard the water to avoid accidentally knock.
Notes:
Children should be cared by adults to use the engine model, in order not to be burned or hert by broken glass.